Products
Floor Standing
WAMM Master Chronosonic
Chronosonic XVX
Alexx V
Alexia V
Sasha V
The WATT/Puppy
SabrinaX
Bookshelf/Surface Mount
TuneTot
Alida CSC
Center Channel
WASAE Center
Mezzo CSC
Subwoofers
LōKē
Submerge
Wilson Audio Subsonic
ActivXO
Equipment Isolation
Pedestal
Acoustic Diode
Legacy Products
Wilson Audiophile Recordings
Support
Dealers
Parts & Accessories
Manuals
Online Warranty Form
Subwoofer Installation Audio Tracks
Frequently Asked Questions
Certified Authentic™ Program
Contact Us
Media & History
Videos
Reviews
Awards
Join our Mailing List
David A. Wilson
Parts & Accessories Store
Manual
Where to Listen & Buy
Features
Specifications
Support
Awards & Reviews
LōKē Technical Specifications
Driver & Amplifier
Woofer
10 inch Woofer (25.4 cm)
Amplifier Power
500 watts
Frequency Response (Amplifier)
20 Hz to 250 Hz (+/- 1 dB)
Effective Piston Area
21.75 in^2
Effective Displacement
33.42 in^3
Dimensions
Height
20 3/4 inches (52.71 cm
Width
13 7/8 inches (35.24 cm)
Depth (With Grill)
21 3/4 inches (55.24 cm
Depth (No Grill)
21 inches (53.34 cm)
System Weight
110 lbs each (49.9 kg)
Total System Shipping Weight (Approximate)
175 lbs (79.38 kg)
Parameters
Test Conditions
Typical Value
Input Sensitivity (L+R)
RCA IN 520W/4ohms @115VAC
-10dBV
XLR IN 500W/4ohms @115VAC
-10dBV
Input Sensitivity (L+R)
RCA IN Normal input level switch
310 mVrms
RCA IN Hi-Level input level switch
620 mVrms
(Signal in Left and Right)
XLR IN Normal input level switch
630 mVrms
XLR IN Hi-Level input level switch
1.25 Vrms
Max Input Level (L+R)
RCA IN Normal input level switch
1.1 Vrms
RCA IN Hi-Level input level switch
2.3 Vrms
XLR IN Normal input level switch
2.4 Vrms
XLR IN Hi-Level input level switch
4.6 Vrms
Input Impedance
RCA IN
10k ohms
XLR IN
20k ohms
Gain
AMP output 100Hz @ 1W output
+43.3 dB (normal)
+37.2 dB (Hi- Level IN)
Input Saturation Level
RCA left or right 100Hz
>2V (Hi-Level IN)
XLR left or right 100Hz
>2V (Hi-Level IN)
Noise Level
volume=0dB (MAX)@A weighted
-62.3dBV
S/N Ratio
volume=0dB (MAX)@A weighted
98.4 dB
THD+N Ratio
20-20kHz Filter, Rated Power @100Hz
< 1%
Frequency Response
Amplifier output
20 Hz to 250 Hz (+/- 1 dB)
Output Power (4Ω)
100Hz@115VAC, Input: -10dBV (L+R)
500 W
Auto ON/OFF
Auto ON Sensitivity
RCA Left ,100Hz
3mV
Auto OFF Time
20mins
Time Delay
2ms
Power Amplifier Protection
A- Short-circuit and under load protection
A-Yes
B- Thermal protection
B-Yes
C-Power Supply Protection-Full Power Protection
C-Yes
Power Consumption
@230Vac/60Hz A- Standby mode
A- 0.5 W — 0.05 A
@230Vac/60Hz B- ON mode
B- 8.0 W — 0.13 A
@230Vac/60Hz C- 1/8 power
C- 83 W — 0.88 A
@230Vac/60Hz D- 1/4 power
D- 157 W — 1.61 A
@230Vac/60Hz E- Rated power
E- 626 W — 5.6 A
@115Vac/60Hz A- Standby mode
A- 0.5 W — 0.05 A
@115Vac/60Hz B- ON mode
B- 7.7 W — 0.18 A
@115Vac/60Hz C- 1/8 power
C- 83 W — 1.51 A
@115Vac/60Hz D- 1/4 power
D- 162 W — 2.78 A
@115Vac/60Hz E- Rated power
E- 654 W — 9.4 A
Your experience on this site will be improved by allowing cookies.
Allow cookies